|
|
Build Your Online Product Catalogs?
| Product Name: |
Submersible pump for hot water(water pump)
|
| Supply Ability: |
10 million |
| Related proudcts |
water pump, submersible pump, ss submersible pump, |
| Specifications |
234kg |
| Price Term: |
FOB,CIF |
| Port of loading: |
Tianjin,China |
| Minimum Order |
10 sets |
| Unit Price: |
890USD |
|
ATQJR series submersible pump
Application
1.Collecting and reusing boiler hot water.
2.Collecting and reusing the leaking water of heating pipelines in winter.
3.Factory hot water heat dissipation and reuse (the pump should be submerged into water when working).
4.Pumping high temperature water in the best-supply network groove.
5.Suitable for heat-supply equipment maintenance.
6.Suitable for bath center hot water supply.
7.Lifting underground hot spring water, etc.
Advantages
1.It can pump hot water within 125℃
2.It can be horizontally used (while the service life will lessen 40% than that of vertical use).
3.Easy installation.
4.Air-free design, avoiding the trouble of pump priming.
5.The motor is lubricated by water. With hydrocooling and high temperature water-proof wire, it is pollution free to the environment.
6.No need to build pump room.
7.Stable operation and low noise.
Medium Range
1.Clean water, chilled/cold water, rainwater, underground gushing water of mining, drinking water, mineral water, etc.
2.Water temperature range: +5℃- +125℃
3.Solid content(mass ratio)¡Ü0.01%
4.PH value: 6.5- 8.5
5.H2S content: ¡Ü1.5mg/L
6.CLcontent: ¡Ü400mg/L
7.The full set must be submerged into water absolutely.
8.Industrial high-temperature water (If pumping the corrosive liquid, please inform us in advance ) : high-temperature boiler water and mineral water.
Motor parameter
1.The submersible motor is lubricated by clean water. It must be filled with clean water, or its service life will be lessen.
2.If you forget filling, the motor will be broken.
3.Motor protection level: IPX8.
4.Magnet wire is high-temperature water-proof.
5.The motor should be submerged into water and be operated in vertical from with a depth no more than 70mand the lower distance to the bottom of the pool is more than 0.3m.
6.The motor will operate continuously. If it is used in pool, the fair water is needed to cool the motor.
7.The motor must be filled with clean water.
Power
Voltage: 3 |
| Company: |
Aote Tian Pump Co.,Ltd.
|
| Contact: |
Ms. Ealine Wang |
| Address: |
No. 2, Xinwang Road, Shuangqiaohe Industrial Park, Jinnan District, Tianjin, China (Mainland) |
| Postcode: |
300300 |
| Tel: |
022-88519659 |
| Fax: |
86-22-28568169-13 |
| E-mail: |
|
|
|
|
Home
